Operation Manual

Operation
66 Operating manual 969 - 00.0 - 08/2014
5.17Swinging out the table plate
If the machine is equipped with a special frame, part of the table
plate can be folded down to create space under the lower arm for
sewing larger pieces.
Fig. 35: Swinging out the table plate
1. Fold the machine head (1) to the rear in the direction of the
arrow.
2. Release both clamps (3) fastening the folding part of the table
plate (2) to the fixed part of the plate (4).
WARNING
Risk of injury from moving parts.
Switch off the machine before swinging out the table
plate.
(1) - Machine head
(2) - Swingable part of the table plate
(3) - Clamp
(4) - Fixed part of the table plate
①
②
④
③