Operation Manual

Operation
Operating manual 969 - 00.0 - 08/2014 43
5.9 Raise the presser foot
The foot pedal is used while sewing to raise the presser foot, e.g.,
to move the material. The machine's electronic control unit allows
various operating modes to be preset.
Fig. 22: Pneumatically raising presser foot with pedal
ATTENTION
Risk of damage to machine from collision between needle
bar and presser foot.
Before raising the presser foot, use the electronic control
panel to position the needle in the upper or lower idle position.
(+1) - Sewing position
(0) - Idle position
(-1) - Presser foot raised position
(-2) - Cutting and bar tacking position
(3) - Pedal
(4) - OP1000 control panel
③
④
(+1)
(0)
(-1)
(-2)