Operation Manual

Operation
42 Operating manual 969 - 00.0 - 08/2014
1. Turn the thread limiter (2) in direction (3) until it moves to the
right side of the opening (5).
2. Move the thread limiter (2) into or out of the machine.
• For thin materials:
Move the thread limiter (2) out of the machine.
• For thick materials:
Move the thread limiter (2) into the machine.
3. Adjust the thread limiter (2) so that the slot (5) clicks into the
tensioning plate.
4. Sew to test whether or not the thread limiter setting is correct.