Operation Manual

Operation
30 Operating manual 969 - 00.0 - 08/2014
5.5 Replacing the hook thread bobbin
Fig. 13: Changing the hook thread bobbin
1. Press theF key on the OP1000 control panel (3).
 The machine automatically turns to the position required for
changing the hook thread bobbin. It is not possible to operate
the machine with the pedal at this time (Safe Stop).
2. Manually pull the needle thread out of the needle eye until the
end of the thread (1) is approx. 200 mm long.
3. Press the cover (2) at the position marked with an arrow until
it bends and can be turned.
 An opening for replacing the hook thread bobbin opens.
WARNING
Risk of injury from needle and moving parts.
Turn off the sewing machine before replacing the
bobbin.
①
②
③
(1) - Thread end in needle
(2) - Cover
(3) - OP1000 control panel