Operation Manual

Operation
Operating manual 969 - 00.0 - 08/2014 27
5.4 Threading and winding on the hook thread
Threading hook
thread
Fig. 10: Threading thread in reel holder
1. Slide reel on bobbin (6)
2. Release the nut (5).
WARNING
Risk of injury from needle and moving parts.
Turn off the machine before threading the thread.
ATTENTION
An incorrect height can cause the thread to wind onto the
tube!
Check that the tube height is set correctly.
10-15 mm
10-15 mm
①
②
③
④
⑤
⑥
(1) - Tube
(2) - Hole in the pre-tensioner
(3) - Thread guide
(4) - Hole in the tube
(5) - Nut
(6) - Bobbin