Operation Manual

Operation
22 Operating manual 969 - 00.0 - 08/2014
5.3 Threading the needle
5.3.1 Threading thread in reel holder
On all submodels, the thread is fed through the machine from a
reel on a reel holder.
WARNING
Risk of injury from needle and moving parts.
Turn off the sewing machine before threading the
thread.
ATTENTION
An incorrect tube height causes the thread to wind onto
the needle tube resulting in irregular needle thread ten-
sion. This can result in an uneven seam and uneven thread
lengths after cutting!
Check that the tube height is set correctly.