Operation Manual

Setup
Operating Manual 967 version 00.0 - 11/2013 89
7.10.2 Setting operating pressure
Correct setting
The operating pressure in the pneumatic system is 6 bar.
Fig. 49: Setting operating pressure
1. Pull the adjustment knob (1) up.
2. Set the operating pressure so the pressure indicator (2) shows
6 bar:
• To increase pressure: turn the adjustment knob (1)
clockwise.
• To reduce pressure: turn the adjustment knob (1) coun-
terclockwise.
3. Push the adjustment knob (1) down.
Machine damage possible due to incorrect pressure.
Incorrect pressure can result in damage to the machine.
Make sure the operating pressure is set correctly before start-
ing the machine.
ATTENTION
0
2
8
4
6
10
(1) – Adjustment knob
(2) – Pressure indicator
཰
ཱ