Operation Manual

Setup
86 Operating Manual 967 version 00.0 - 11/2013
7.9.3 Connecting control unit
Connect the control unit as follows:
• Insert the plug of each connecting cable into the sockets on
the back of the control unit.
The sockets for each connector plug are labeled with picto-
grams.
• Connect the control unit to the power supply using the power
cable.
Important: Read the  Operating manual for the eco/classic
DAC control unit.
The manual is included with the control unit.
It can also be found in the "Downloads" section of
www.duerkopp-adler.com.
Risk of death from electric shock.
Disconnect the power plug before connecting the
control unit.
Make sure the power plug is not accidentally
plugged back in.
DANGER