Operation Manual

Setup
Operating Manual 967 version 00.0 - 11/2013 85
7.9 Electrical connection
7.9.1 Checking mains voltage
Important: The voltage on the type plate of the sewing drive must
correspond to the mains voltage.
1. Check mains voltage before connecting the machine.
7.9.2 Connecting sewing lamp
Connecting transformer to control unit
Risk of death from electric shock.
The machine should only be connected to power
by qualified electricians.
Disconnect the power plug before carrying out
work on the electrical equipment.
Make sure the power plug is not accidentally
plugged back in.
The voltage on the type plate of the sewing drive
must correspond to the mains voltage.
DANGER
Risk of death from electric shock.
Supply voltage for the sewing lamp remains on
even if the sewing machine is turned off through
the power switch.
Unplug the sewing machine before assembling
and connecting the sewing lamp to the trans-
former.
Make sure the power plug is not accidentally
plugged back in.
DANGER