Operation Manual

Setup
84 Operating Manual 967 version 00.0 - 11/2013
7.8 Assembling thread reel holder
Fig. 46: Assembling thread reel holder
1. Assemble the tube (3) with bobbin (2) and thread guide (1) as
shown in image.
2. Screw the thread reel holder to the table plate using the
nuts (4), washers (5) and rubber inlays (6) as shown in the
image.
3. Set up the bobbin and thread guide along the horizontal axis
of the machine as shown in the image.
(1) – Thread guide
(2) – Bobbin
(3) – Tube
(4) – Nut
(5) – Washer
(6) – Rubber inlay
཰
ི
ཱི
ུ
ཱ
ཱི
ུ
ཱུ
250 mm