Operation Manual

Setup
80 Operating Manual 967 version 00.0 - 11/2013
7.6 Setting frame height and pedal position
Frame can be set to any height between 770 to 910 mm.
Fig. 44: Setting frame height and pedal position
Risk of occupational illness (musculoskeletal
damage) to operating personnel from failure to
comply with ergonomic requirements.
Adjust the frame height to the height of the person
operating the machine.
Mount the pedal so the middle is no more
than 15 mm to either side of being directly in line
with the needle.
WARNING
(1) – Table plate
(2) – Frame height adjustment
screws
(3) – Pedal
(4) – Pedal connecting rod couplings
཰
ཱ
ཱི
ི
Risk of crushing
Loosening the screws on the lower frame bars can
result in the table plate collapsing under its own
weight. This is more likely if the upper machine
section has already been mounted.
Make sure your hand does not get crushed while
loosening the screws.
WARNING