Operation Manual

About this Manual
6 Operating Manual 967 version 00.0 - 11/2013
1.5.2 Proper use
The Dürkopp Adler 967 is intended for sewing heavy to very heavy
material (max. material thickness is 20 mm). Heavy to very heavy
material requires a needle thickness of 120-180 Nm.
The machine is only intended for use with dry material. The
material cannot contain any hard objects.
The seam is produced using core spun threads, polyester fibers,
or cotton threads.
The sewing machine is intended for industrial use.
The machine may only be set up and operated in dry conditions
on well-maintained premises. If the machine is operated on
premises that are not dry and well-maintained, then further
measures may be required which must be compatible with
EN 60204-31:1999.
Only authorized/trained personnel may operate the machine.
The manufacturer cannot be held liable for damages resulting from
improper use.
Risk of electric shock, crushing and punctures!
Improper use can result in injury.
Please observe all instructions in the manual.
WARNING
Improper use can result in property damage.
Please observe all instructions in the manual.
ATTENTION