Operation Manual

Setup
Operating Manual 967 version 00.0 - 11/2013 77
7.3 Assembling frame components
Fig. 41: Assembling frame components
1. Screw the cross bars (4) to the frame bars (3).
2. Screw the oil can holder (8) to the upper cross bar (4).
3. Screw the cross strut (7) to the foot struts (6).
4. Insert the inner bars (2) so that the longer ends of the
headpieces (1) are over the longer ends of the foot struts (6).
5. Screw the inner bars (2) down so that both headpieces (1) are
at the same height.
6. Important: Turn the adjustment screw (5) so the frame is
standing evenly on the floor.
(1) – Inner bar headpiece
(2) – Inner bar
(3) – Frame bar
(4) – Cross bars
(5) – Adjustment screw
(6) – Frame foot strut
(7) – Cross strut
(8) – Oil can holder
཰
ི
ཱི
ུ
ཱུ
ྲྀ
ཱ
ཷ