Operation Manual

Setup
76 Operating Manual 967 version 00.0 - 11/2013
Fig. 40: Scope of delivery
7.2 Removing transport securing devices
All transport securing devices must be removed prior to setup.
1. Remove the lashing straps and wooden blocks from the upper
machine section, table and frame.
2. Remove the support wedges between the machine arm and
needle plate.
(1) – Upper machine section
(2) – Rubber buffers
(3) – Table plate
(4) – Drawer
(5) – Frame
(6) – Setpoint device
(7) – Pedal
(8) – Foot switch
(9) – Compressed air regulator unit
(10) – Oil pan
(11) – DAC control unit
(12) – Sewing lamp transformer
(13) – Reel holders
཰
ི
ཱི
ུ
ཱུ
ྲྀ
ཹ
ླྀ
ཷ
ོ
ེ
ཻ
ཱ