Operation Manual

Operation
60 Operating Manual 967 version 00.0 - 11/2013
5.14.2 Transferring a key function to the auxiliary
switch
You can transfer one of the key functions to the auxiliary switch.
Select a function that you frequently use to be able to switch it on
faster while sewing.
Fig. 32: Keypad for quick functions
The key function is transferred by turning the screw under the key
until it is vertical.
Only one function can be transferred to the auxiliary switch (1).
Thus, only one screw can be set vertically.
All screws must be turned back to their original horizontal position
before transferring a new function.
(1) – Auxiliary switch
(2) – Screw activates auxiliary switch
(3) – Original position
཰
ཱ
ི