Operation Manual

About this Manual
4 Operating Manual 967 version 00.0 - 11/2013
Process steps during operation (sewing and preparation)
Process steps during servicing, maintenance and assembly
Process steps using software control panel
Each process step is numbered:
1. First process step
2. Second process step
The order of steps must strictly be followed.
Result of process
Changes to machine or display
Important
This information must be specifically observed during the process
step.
Additional information
Additional information, such as alternative operating options.
Order
Indicates what work must be performed before or after configuring
settings.
References
 Reference to another section in the manual.
Safety Important warnings for the machine operator are specially desig-
nated. Since safety is of particular importance, hazard symbols,
levels of danger and their signal words are described separately
in  Chapter 3: Safety Information.
Orientation If the figure is unclear, indications of "right" and "left" are always
from the operator's point of view.
1.
2.
etc.
