Operation Manual

Operation
Operating Manual 967 version 00.0 - 11/2013 57
3. Finish the seam, then press the operating pedal (3) completely
back at the end of the seam.
 Machine automatically sews a bar tack at the end of the
seam.
Selecting type of seam bar tacking and stitch count with
automatic seam bar tacking:
The machine's control unit allows selection between a single,
double or multiple (quadruple) bar tack. The type of bar tack
is selected using the keys on the OP1000 control panel – see
 Operating manual for eco/classic DAC control unit.
Selecting seam bar tacking style with automatic seam bar
tacking:
Seams can be bar tacked either normally or decoratively.
Decorative style With a decorative seam bar tack, all forward and backward needle
stitches in the bar tack area go in the same needle holes while
sewing.
Normal style With a normal seam bar tack, the insertions can be offset from
one another. Since normal seam bar tacking is faster, the machine
is delivered with normal seam bar tacking preset by default.
The seam bar tacking style can be selected using the electronic
control panel parameters – see  Operating manual for
eco/classic DAC control unit.