Operation Manual

Operation
54 Operating Manual 967 version 00.0 - 11/2013
5.13.2 Sewing with two stitch lengths
Fig. 28: Sewing with two stitch lengths
On machines with adjusting wheels for two stitch lengths, the top
adjusting wheel (4) is for longer and the bottom adjusting wheel (3)
is for shorter stitch lengths. The mark (2) on the left of the adjusting
wheel indicates the stitch length selected.
Important: The larger stitch length must not be shorter than the
smaller stitch length. Do not set a shorter stitch length on the top
adjusting wheel (4) than on the bottom adjusting wheel (3).
(1) – Key on keypad for stitch length
(2) – Marks labeling selected stitch lengths
(3) – Bottom adjusting wheel for shorter stitches
(4) – Top adjusting wheel for longer stitches
཰
ཱ
ི
ཱི
Machine can be damaged if the adjusting wheels are
forced.
The machine is designed so the top adjusting wheel cannot be
set at a lower stitch length than the bottom adjusting wheel.
Do not attempt to force the top adjusting wheel to set a lower
stitch length.
ATTENTION