Operation Manual

Operation
44 Operating Manual 967 version 00.0 - 11/2013
6. Press the pedal to position (-2).
 Thread is cut and presser foot rises.
7. Release the pedal to position (0).
 Presser foot remains raised until another seam is started.
Operating mode: presser foot rises automatically every time
the machine stops.
1. Press both keys on the OP1000 control panel (4) for presser
foot position.
 Their signal diodes turn on – see  Operating manual for
eco/classic DAC control panel. Presser foot rises.
2. Press the pedal (3) to position (+1).
 Presser foot lowers and machine engages.
3. Release the pedal to position (0).
 Machine stops and presser foot automatically rises.
4. Press the pedal to position (+1).
 Presser foot lowers and machine engages.
5. Press the pedal to position (-2).
 Thread is cut and presser foot rises.
6. Release the pedal to position (0).
 Presser foot remains raised until another seam is started.
There is a time delay between starting the presser foot and the
machine starting in order to ensure the material is pressed by the
presser foot by the time sewing begins. This delay can be set
using operating parameters – see  Operating manual for
eco/classic DAC control panel.