Operation Manual

Operation
Operating Manual 967 version 00.0 - 11/2013 41
1. Turn the thread limiter (2) in direction (3) until it moves to the
right side of the opening (5).
2. Move the thread limiter (2) into or out of the machine.
• For thin materials:
Move the thread limiter (2) out of the machine.
• For thick materials:
Move the thread limiter (2) into the machine.
3. Set the thread limiter (2) so its slot (5) clicks into the locking
plate.
4. Sew to test whether or not the thread limiter setting is correct.