Operation Manual

Operation
40 Operating Manual 967 version 00.0 - 11/2013
5.8 Setting thread limiter
Together with the balancing spring, the thread limiter produces
suitable tension on the needle thread as it moves over the bobbin
housing. The thread is limited more when sewing thin materials
and less when sewing thick materials.
Correct setting:
The needle thread should be slightly tensioned when threading
the loop over the bobbin housing. Slight movement in the balanc-
ing spring indicates proper tensioning.
Fig. 21: Setting thread limiter
Risk to injury to finger from moving thread lever.
Turn off the machine before setting the thread lim-
iter.
WARNING
(1) – Balancing spring
(2) – Thread limiter
(3) – Direction to press when unlocking limiter
(4) – Limiter slots
(5) – Limiter opening
཰
ཱ
ི
ཱི
ུ