Operation Manual

Operation
Operating Manual 967 version 00.0 - 11/2013 29
5.5 Replacing hook thread bobbin
Fig. 13: Replacing hook thread bobbin
1. Press the F key on the OP1000 control panel (3).
 The machine automatically turns to the position required for
changing the hook thread bobbin. It is not possible to operate
the machine with the pedal at this time (Safe Stop).
2. Pull the needle thread further through the needle eyelet by
hand until the thread end (1) is approx. 200 mm long.
3. Remove the cover (2) on the opening for changing the hook
thread bobbin.
Risk of injury from needle and moving parts.
Turn off the sewing machine before replacing the
bobbin.
WARNING
(1) – Thread end in needle
(2) – Cover
(3) – OP1000 control panel
཰
ཱ
ི