Operation Manual

Operation
28 Operating Manual 967 version 00.0 - 11/2013
Winding Fig. 12: Winding hook thread
1. Place the bobbin (4) onto the bobbin winder shaft (3) and onto
the bobbin driving pin (5).
2. Bring the bobbin winder to position I according to symbol (1)
by pressing the bobbin winder switch (2).
 Bobbin winder starts.
Once the bobbin winder starts, the thread will begin winding
automatically – the bobbin winder is driven by a separate motor.
You can still sew while the hook thread is winding.
(1) – Symbol for turning bobbin winder on/off
(2) – Bobbin winder switch
(3) – Bobbin winder shaft
(4) – Bobbin
(5) – Bobbin driving pin
཰
ི
ཱི
ུ
ཱ