Operation Manual

Operation
22 Operating Manual 967 version 00.0 - 11/2013
5.3 Threading needle thread
5.3.1 Threading thread in reel holder
On all subclasses, the thread is fed through the machine from a
reel on a reel holder.
Fig. 6: Threading thread in reel holder
1. Slide reel on bobbin (2).
2. Important: Feed thread into the thread guide (1) openings as
shown above.
Risk of injury from needle and moving parts.
Turn off the sewing machine before threading the
thread.
WARNING
Incorrectly threading the thread can result in an uneven
seam, a malfunction in the cutter and automatic unraveling
of the thread from the bobbin due to the thread's own
weight.
Make sure the thread is properly threaded.
ATTENTION
(1) – Thread guide
(2) – Bobbin
཰
ཱ