Operation Manual

Safety Information
12 Operating Manual 967 version 00.0 - 11/2013
Check the machine during use for any visible external damage.
Stop working if you notice any changes to the machine. Report
any changes to your supervisor. A damaged machine should no
longer be used.
Machines or machine parts whose working life has expired should
no longer be used.
They must be properly disposed of according to legal regulations.
The machine should only be set up by qualified technicians.
Maintenance work and repairs should only be carried out by
qualified technicians.
Safety equipment should not be removed or deactivated. If this
hinders repair, safety equipment should be immediately reinstalled
and reactivated once repairs are complete.
Electrical equipment should only be serviced by qualified
electricians.
The power cable must have a plug authorized for the country in
which the machine is being used. Only qualified electricians should
attach plugs to power cables.
Working on live components and equipment is prohibited.
Exceptions are regulated by DIN VDE 0105.
Incorrect or defective replacement parts can negatively affect
safety and damage the machine. Make sure you only use original
replacement parts from the manufacturer.