Operation Manual

Setting up
Operating manual 911 - Version 00.0 - 06/2013
95
Lifting the machine
Use a lifting carriage or forklift when lifting the machine for transport.
Transport on own frame rollers
The frame feet must be rotated upwards for transportation using the
integrated frame rollers.
Figure 62: Transporting the sewing unit using the integrated frame rollers
Before transport
2. Release the nuts (1) on the frame feet (2).
3. Rotate the frame feet (2) fully upwards.
4. Tighten the nuts (1) so that the frame feet (2) remain upwards.
After transport
1. Release the nuts (1) on the frame feet (2).
2. Rotate the frame feet (2) downwards so that the frame stands evenly
and stable on all 4 feet.
3. Tighten the nuts (1) at all 4 frame feet.
Danger of injuries from unsafe positioning of the machine.
Before commissioning all frame variants ensure that the frame
feet are turned out sufficiently and the nuts tightened so that the
machine stands securely.
WARNING
Risk of injury.
The machine is heavy
Always use a lifting carriage or forklift for lifting the machine to
avoid back injuries or crushing injuries if the machine falls
down.
WARNING
(1) - Nut
(2) - Frame foot
(3) - Roller
ི
཰
ཱ