Operation Manual

Creating programs with DA CAD 5000
Operating manual 911 - Version 00.0 - 06/2013
81
7 Creating programs with DA CAD 5000
You can use the DA CAD 5000 program to create seam programs on a
PC. The DA CAD 5000 program is available as additional equipment
( Section 3.5 Additional equipment, page 17).
This section only provides an overview of the program steps. A detailed
description is provided in the  Operating manual for the DA CAD 5000
program.
Selection of the machine class.
The first step is to select the machine class.
Figure 55: Select the machine class
Creating the seam contour
The next step is to draw the seam contour.
Figure 56: Draw the seam contour