Operation Manual

Operating the controller

Operating manual 911 - Version 00.0 - 06/2013

Setting stroke position

Calling the

sewing foot

test

1. In the menu item Extras > Service > Multitest tap the Set

stroke

position option.

The following options are displayed:

Testing the

sewing foot

2. Tap the desired symbol and execute the function.

Output elements

No. Meaning

Y1 Foot mode

Y2 Bobbin flap open

Y3 Needle cooling on

Y4 Right clamp

Y5 Left clamp

Y9 Threading switch lamp on

Y10 Oil level indicator warning light on

Y25 Laser marking lamp 1 (Z)

Y26 Laser marking lamp 2 (Z)

Y27 Laser marking lamp 3 (Z)

Y28 Laser marking lamp 4 (Z)

Risk of injury from sharp or moving parts.

Do not reach into the machine when setting the stroke position.

Switch off the power to the drive when you wish to test the

freedom of motion of the sewing foot rod.

WARNING

Setting stroke position

Symbol Meaning

Perform a reference run

Check the movement

Switching between a hopper and presser foot.

Switch over the mode of operation

Switch off the power to the drives

Manually check the freedom of motion of the sewing foot rod

Move to position

Set the sewing foot height