Operation Manual

Operating the controller
74
Operating manual 911 - Version 00.0 - 06/2013
Testing the touchscreen
You can use the
Extras > Service > Settings menu item to check
that the touchscreen is functioning correctly over all areas of the screen.
Touch test 1. In the menu item Extras > Service > Settings tap the
Control panel settings option.
2. In the following window tap the
Touch Test option.
An empty window is opened.
3. Use your finger to tap various different points or draw lines.
When the touchscreen is functioning correctly all touched points of
the screen are marked.
Testing machine functions
You can use the Extras > Service > Multitest menu item to check
the inputs and outputs, test the sewing motor and set the stroke position.
Figure 49: Multitest
The Transport clamps function is only intended for use by
Dürkopp Adler Service personnel.
Testing inputs and outputs
This manual only provides an overview of the test possibilities.
The tests may only be performed by qualified personnel that have
received training from Dürkopp Adler.
Risk of injury from sharp or moving parts.
Do reach into the machine during function testing of the input or
output elements.
WARNING