Operation Manual

Operating the controller
68
Operating manual 911 - Version 00.0 - 06/2013
Overview of the individual machine parameters
MP1 - Configuration
Symbol Meaning
Needle cooling
The following options can be set:
None: No type of needle cooling is active.
Air cooling (Def.): The needle is cooled with air while sewing the seam.
Ice cooling: Optional equipment.
Foot mode
The foot can be operated in the following modes:
Hopper: The foot only presses on the sewing material while the needle is in
the sewing material.
Presser: The foot presses continuously on the sewing material.
Sewing field size
Take care to ensure a valid sewing field size for your subclass when making
the selection. (
 Section 3.4 Technical data, page 15)
Normal sewing field (Def.): A sewing field of up to 200 x 300mm is
available.
Extra-large sewing field: A larger sewing field can be used in conjunction
with the alternating clamps.
Optional equipment
Reduced clamp pressure:
Optional equipment allowing only a small amount of clamp pressure to
allow better alignment on insertion.
Laser marking lights:
Optional equipment providing orientation lines on insertion for easier
alignment. Up to 4 laser marking lights can be switched on for each
program. This setting only activates the option, the actual switching is
defined in the program parameters (
 Section Laser marking lights,
page 63)
Barcode reader:
Optional equipment for performing a safety check before sewing.
A barcode can be stored with each program. Agreement with the barcode
on the clamp
is checked. Sewing only proceeds when the barcodes agree.
You enter the barcode ID in the program parameters (
 Section Clamp ID
code, page 63).
Clamp type
The following clamp types are available:
Single clamp: One-piece parallel clamp with angle mount
Single clamp with hanger (Def.): One-piece parallel clamp with hanger
mount
Double clamp: Two-piece parallel clamp with angle mount
Alternating clamp: Removable clamp
Special clamp: Special clamp
Clamp limits
Standard limits (Def.)
No additional structures are taken into account.
Special limits
Individual limits are taken into account.