Operation Manual

Operating the controller
Operating manual 911 - Version 00.0 - 06/2013
67
6.18 Editing machine parameters
You use the machine parameters to define the basic machine settings that
apply to all programs.
Select the
parameter
group
1. Tap the menu items Edit > Machine parameters.
The window for selecting the machine parameter group appears.
Figure 47: Select the machine parameter group
Change the
machine
parameter
2. Tap the desired parameter group.
The individual parameters of this group are displayed.
3. Tap the desired parameter.
The window for modifying the parameter value opens.
4. Set the parameter to the desired value.
( Entering parameter values, page 45)
There are 6 machine parameter groups:
Symbol Parameter group
MP1 - Configuration
General settings
MP2 - Limit values
Limit values for speeds and positions
MP3 - Needle thread monitor
Behavior after thread breakage
MP4 - Thread cutting
Speed, position and tension
MP5 - Thread clamping
Starting angle
MP6 - Counters
Settings for program and bobbin counters