Operation Manual

Operating the controller

Operating manual 911 - Version 00.0 - 06/2013

6.17.1 Changing the contour of a seam program

Change the

contour

1. Tap the menu items Edit > Seam program > Adjust Contour.

The contour adjustment window appears:

Figure 43: Contour adjustment - Part 1

Select the

approximate

position

2. Use the arrow buttons to move the cursor (1) to the position on the

contour that is to be changed.

You can also use the slider control on the scale (2) to select the

stitching area you wish to change:

The first stitch of the seam is at the top and the last stitch is at the

bottom.

3. Tap the

Go To button.

The selected contour region is displayed in detail.

The stitching point (2) to be modified is marked in red.

Figure 44: Contour adjustment - Part 2

Select the

exact stitch

4. Use the arrow buttons to move the stitching point to the new position (1).

The modified seam path is displayed in green.

5. Tap the

Next button.

The window for entering the technology operations opens.

(1) - Cursor (2) - Scale: First to last stitch

཰ཱ

(1) - Green: New stitching point (2) - Red: Old stitching point

཰

ཱ