Operation Manual

Operating the controller
58
Operating manual 911 - Version 00.0 - 06/2013
6.15 Copying a seam program or sequence
You can also copy seam programs or sequences from a USB stick to the
controller or from the controller to a USB stick.
Not all commonly available USB sticks are suitable for the copying
process.
You can obtain a suitable USB stick from Dürkopp Adler using the order
number 9805 791113.
Copy file Select the file
1. Tap the menu items
File > Copy.
The window for selecting the file to be copied appears:
Figure 41: Copying a seam program or sequence
2. Use the buttons (1) to select whether the data is to be copied from the
DAC controller or the USB stick.
The selected button is highlighted with a dark background.
The files present at this location are list in a selection window (2).
You can use the
File Filter to make the list more manageable
( Section 6.4.6 Using file filters, page 43).
3. Tap the desired file.
The selected file is highlighted with a dark background.
4. Tap the
Copy File button.
The selected file is copied to the USB stick or the controller.
(1) - Select the source to be copied (2) - File selection window
཰
ཱ