Operation Manual

Operating the controller

Operating manual 911 - Version 00.0 - 06/2013

6.13 Editing an existing sequence

You can edit an existing sequence by adding or removing seam programs.

Select the sequence to be edited

Open the

sequence

1. Open the sequence you wish to modify via the menu items File >

Open ( page 47).

The sequence is opened in the main screen.

2. Tap the menu items

Edit > Sequence.

The window for editing the sequence appears.

Figure 40: Editing an existing sequence

Edit the

sequence

3. Add programs to the sequence via the Insert button and remove

programs from the sequence via the

Delete button.

The steps correspond to the procedure used for creating a new

sequence ( Section 6.12 Creating a new sequence, page 55).