Operation Manual

Operating the controller
54
Operating manual 911 - Version 00.0 - 06/2013
6.11 Performing a contour test
Always perform a contour test every time after creating or editing a
program to ensure that the entire contour lies within the permissible
sewing field
Checking a
contour
Checking a contour
1. Tap the menu items
Edit > Seam program > Contour test.
The
Contour test window appears.
Figure 38: Contour Test
2. Move along the contour stitch by stitch using the Forwards and Back
buttons.
3. Check that all points lie within the sewing area.
Damage to the machine through exceeding the sewing field size
If you have entered contour points that lie outside the sewing field then
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test every time after creating or editing a
contour to ensure that the entire contour lies within the permissible
sewing field.
ATTENTION