Operation Manual

Operating the controller
Operating manual 911 - Version 00.0 - 06/2013
51
6.10 Creating a new seam program
New seam programs are created using a Teach-In procedure.
Individual seam paths with specific seam parameters are defined via the
operating terminal in order to do this.
Calling up
Teach-In
1. Tap the menu items File > New > Seam Program.
The Teach-In window appears.
Figure 36: Teach-In
Defining the starting point
Select the
starting point
2. Use the arrow keys (3) to move the cursor (2) to the desired starting
position.
3. Tap the
OK button after entering the password.
The desired starting point is adopted and marked with a green dot.
Selecting the line type
Select the
line type
4. Use the line selection buttons (8) to select the type of line to be defined:
•
Seamless path:
The clamps move over this path to the next position without sewing.
•
Straight seam:
A straight path is sewn.
•
Curved seam:
A curve is sewn.
 After tapping the button for a straight or curved seam the
corresponding window for entering the seam parameters for this path
opens.
཰
ཱ
ི
ཱི
ུ
ཱུ
ྲྀ
ཷ
(1) - Display of the cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: “Accept”
(5) - Save button
(6) - Delete button
(7) - Parameter button
(8) - Line selection button