Operation Manual

Operating the controller
Operating manual 911 - Version 00.0 - 06/2013
47
6.5 Opening a seam program or sequence for sewing
You will usually open an existing seam program or and existing sewing
sequence.
Opening a
program
1. Tap the menu items File > Open.
The file selection screen is displayed.
All existing seam programs and sequences are displayed.
You can use the
File Filter to make the list more manageable
( Section 6.4.6 Using file filters, page 43).
Figure 31: Opening a file
2. Tap the desired file.
3. Tap the
Open button.
The seam program/sequence is opened on the main screen.
4. Press the pedal forwards to start sewing.
6.6 Briefly sewing with modified values
If you must briefly sew a special material, or use a particular thread
strength with different values, without changing the seam program you
can use the
Correction menu item to temporarily change the values
for thread tension and sewing speed. The values then apply to all
subsequently executed seams until the machine is switched off.
Important: If you wish to adopt the changes then you must modify and
save the program. Otherwise the values are automatically reset to the
previous settings when the machine is switched off.