Operation Manual

Operating the controller
38
Operating manual 911 - Version 00.0 - 06/2013
Structure of the main screen
Title bar (1)
On the main screen this contains the version of the machine. In the various
menus this bar contains information on the currently selected menu item.
Status bar (2)
On the main screen, the currently open sequence is displayed here at the
left and the time of day (11) is displayed at the right. In the various menus
this bar contains information on the currently selected step.
Main window (3)
The contour to be sewn is displayed here.
Program bar (4)
The seam programs of the currently open sequence are displayed here.
The program currently being executed is highlighted in black. The arrow
buttons (6) at the right side of the bar can be used to navigate along the
bar and display any additional programs that do not fit on the bar.
If a sequence is not currently open but rather only a single seam program
then this program fills the entire bar.
Menu bar (5)
The bar at the bottom contains the popup menus. This allows you to
access the various different menu items for creating and editing seam
programs and for performing settings and tests on the machine. An
arrow (1) next to a menu entry indicates that tapping the entry will display
further submenu entries.
Figure 19: Popup menus
Button for repair mode (10)
The topmost button at the right side is used for switching the repair mode
on and off. The current status (
On/Off) is displayed next to the button.
Display of the current seam parameters (9)
The current seam parameters are displayed below the repair mode button
• - Dimensions of the seam
• - Sewing speed
• - Thread tension
• - Number of stitches / amount of looper thread used
཰
(1) - Popup arrow