Operation Manual

Table of contents
2
Operating manual 911 - Version 00.0 - 06/2013
6.4.5 Selecting options from a list....................................................... 40
6.4.6 Using file filters ..........................................................................41
6.4.7 Entering text............................................................................... 42
6.4.8 Entering parameter values......................................................... 43
6.4.9 Switching the full-screen display on and off............................... 44
6.4.10 Switching zooming on and off.................................................... 44
6.5 Opening a seam program or sequence for sewing.................... 45
6.6 Briefly sewing with modified values ........................................... 45
6.6.1 Sewing with a modified thread tension ...................................... 46
6.6.2 Sewing with a modified sewing speed ....................................... 46
6.7 Changing the bobbin.................................................................. 47
6.8 Continuing a seam in Repair mode after an error...................... 48
6.9 Resetting the counter................................................................. 48
6.10 Creating a new seam program ..................................................49
6.11 Performing a contour test ..........................................................52
6.12 Creating a new sequence .......................................................... 53
6.13 Editing an existing sequence ..................................................... 54
6.14 Saving a seam program or sequence under
a different name......................................................................... 55
6.15 Copying a seam program or sequence...................................... 56
6.16 Deleting a seam program or sequence...................................... 57
6.17 Editing an existing seam program .............................................57
6.17.1 Changing the contour of a seam program ................................. 58
6.17.2 Changing the parameters of a seam program ........................... 60
6.18 Editing machine parameters ...................................................... 65
6.19 Checking and changing the technical settings........................... 70
7 Creating programs with DA CAD 5000 .................................. 79
8 Error and information messages ...........................................81
8.1 Error messages .........................................................................81
8.2 Information messages ...............................................................85
9 Maintenance ............................................................................. 87
9.1 Cleaning..................................................................................... 87
9.2 Oil lubrication ............................................................................. 88
9.3 Repairs ......................................................................................89
10 Setting up ................................................................................. 91
10.1 Checking the scope of delivery.................................................. 91
10.2 Transporting the sewing unit...................................................... 92
10.3 Transport locks .......................................................................... 94