Operation Manual

Operating the controller

Operating manual 911 - Version 00.0 - 06/2013

6.3 Starting the software

After switching on the sewing unit at the main power switch the machine

performs a reference run. After this, the startup screen is shown on the

operating terminal for a few seconds.

Figure 17: Startup screen

Here you can select the user interface language or use Service to

quickly access the

Multitest menu.

Both functions can also be accessed later from within the program via the

menu items

Extras > Service.

( Section Testing machine functions, page 74.and

 Section Changing the language, page 73)

If you do not tap any buttons the software automatically switches to the

main screen after a few seconds.

The main screen

The main screen is displayed during sewing. When the machine is started the

main screen is opened with the settings of the last sewing program used.

Figure 18: Main screen

(1) - Language selection button (2) - Multitest quick-access button

཰ཱ

཰

ཱ

ི

ཱི

ུ

ཱུ

ྲྀ

ཷ

ླྀ

ཹ

ེ

(1) - Title bar

(2) - Status bar

(3) - Main window: Display of the seam

contour

(4) - Program bar

(5) - Menu bar: Popup menus

(6) - Arrow buttons for navigating within the

bar

(7) - Button for resetting the counter

(8) - Button for bobbin change

(9) - Display of the current seam

parameters

(10) - Button for repair mode