Operation Manual

Operating the controller
36
Operating manual 911 - Version 00.0 - 06/2013
6.2 Overview of the menu structure
The following table provides an overview of the menu structure and the function buttons on the
main screen.
Different colors indicate which functions are mainly used for normal sewing operations, which
items are used for creating and maintaining seam programs and the menu items that are used
for making technical settings.
Green: Menu items for sewing
Blue: Menu items for creating and managing programs
Magenta: Menu items for settings and information used by technicians
Menu items in popup menus
Menu item Function Submenu items Submenu items Described on
File Open existing sewing
programs, create new
programs, copy or delete
existing programs.
Delete
 page 72
Copy
 page 58
Open
 page 47
New
Seam program
 page 51
Sequence
 page 55
Save As
 page 57
Edit Define general settings
for all programs or
modify an existing
program.
Machine Parameters
 page 67
Sequence
 page 67
Seam program
Parameters
 page 62
Contour Adjustment
 page 62
Contour Test
 page 54
Extras Display options: full-
screen and zoom
Technician menu:
Settings, system
information and tests
Full-screen on/off
 page 46
Zoom on/off
 page 46
Service
Settings
 page 72
System Information
 page 78
Multitest
 page 72
Initialization and
Update
 page 79
Manufacturer (for DA personnel only)
Corrections Short-term sewing with
other values
Thread tension
 page 48
Sewing Speed
 page 48
Buttons on the main screen
Continue sewing the contour from a particular
point
Repair Mode
 page 50
Allow for a manual bobbin change Changing the bobbin
 page 49
Reset counter to a particular value Reset counter
 page 50