Operation Manual

Operating the controller
Operating manual 911 - Version 00.0 - 06/2013
35
6 Operating the controller
The controller is operated via the operating terminal (1) at the right, next
to the upper part of the machine.
Figure 16: Operating terminal
The screen is a touchscreen, i.e. the buttons are displayed on the screen
rather than using physical buttons. Buttons or functions are activated by
tapping the corresponding position on the monitor.
Activating a button/selecting an element:
Touchscreen • Tap the corresponding button or element with your finger or a
touchscreen pen.
6.1 Structure of the software
The software allows the creation and management of seam programs and
sequences. During sewing, these programs are called up and processed
stitch for stitch.
Seam program:
A seam program consists of a seam contour with parameters defining the
individual contour sections.
Up to 99 seam programs can be stored in the system.
Seam programs have a file suffix of .
fnp911 after the filename.
Sequence:
Up to 30 seam programs can be combined in any order to form a
sequence.
Up to 20 sequences can be stored in the system.
Sequences have a file suffix of .
seq911 after the filename.
The software is also used to define general settings that apply to all
programs.
There are also technical menu items for testing and maintaining the
machine.
(1) - Operating terminal
཰