Operation Manual

Operating
Operating manual 911 - Version 00.0 - 06/2013
31
5.9 Replacing the looper thread bobbin
Figure 13: Replacing the looper thread bobbin - Part 1
1. Remove the sewing material holder (1) (for alternating frames only).
2. Press the Safe Stop button (2).
The drive carriage moves to the bobbin change position.
The cover plate (4) pivots to the side.
The sewing feet are moved to the lower position.
The lighting (3) is switched on.
Risk of injury by the needle point or moving parts.
Switch the sewing machine to the Safe Stop mode before
changing the bobbin.
WARNING
(1) - Sewing material holder
(2) - Safe Stop switch
(3) - Lighting
(4) - Cover plate
཰
ཱ
ི
ཱི