Operation Manual

Operating
28
Operating manual 911 - Version 00.0 - 06/2013
Figure 10: Threading in the needle thread part 2
9. Insert the thread through the needle thread monitor (12) and the thread
clamp (13).
10. Insert the thread through the thread guides (15) and (14).
11. Insert the thread through the needle eye in such a way that the loose
thread end faces the looper.
(12) - Needle thread monitor
(13) - Thread clamp
(14) - Guide
(15) - Guide
཰
ཱ
ི
ཱི
ཱུ
ྲྀ
ཷ
ླྀ
ཹ
ེ
ུ
(1) - Thread lever
(2) - Thread regulator
(3) - Guide
(4) - Guide
(5) - Thread tensioning spring
(6) - Diverter
(7) - Guide
(8) - Guide
(9) - Tensioner disc
(10) - Tensioner disc
(11) - Guide
ཻ
ོ
ཽ
ཾ