Operation Manual

Operating
24
Operating manual 911 - Version 00.0 - 06/2013
5.4 Raising the machine upper section
The machine upper section can be raised for maintenance work.
5.4.1 Raising the machine upper section
Important: The drive carriage (2) must be at the rear.
Figure 5: Drive carriage positioned at the rear
Figure 6: Raising the machine upper section
1. Release the locking lever (3) under the table plate.
2. Lift the machine upper section in the head cover region (1) and raise
carefully.
The latch (4) latches into place.
The space under the machine table is now accessible.
Risk of injury from sharp or moving parts.
Switch off the sewing unit at the main power switch before
raising the machine upper section and performing
maintenance work.
WARNING
(1) - Head cover
(2) - Driver carriage
཰
ཱ
(3) - Locking lever (4) - Latch
ི
ཱི
Risk of injury from sharp or moving parts.
Do not reach into the table plate cutout when the machine
upper section is raised.
WARNING