Operation Manual

Operating
Operating manual 911 - Version 00.0 - 06/2013
21
5 Operating
5.1 Switching the sewing unit on and off
Figure 2: Switching the sewing unit on and off
Switching on the sewing unit
1. Turn the main switch (1) to the right into the “I” position.
The following message appears on the display:
“Press pedal for referencing”
2. Press the pedal to perform referencing of the sewing unit.
The main menu appears on the display.
Switching off the sewing unit
1. Turn the main switch (1) to the left into the “0” position.
All drives and the controller are immediately disconnected from the
mains grid.
(1) - Main switch
཰