Operation Manual

Performance description
Operating manual 911 - Version 00.0 - 06/2013
15
3.2 Declaration of conformity
The machine complies with the European regulations specified in the
declaration of conformity or in the installation declaration.
3.3 Intended use
The CNC sewing unit 911 is intended for sewing light to medium sewing
materials.
Threads to be used:
Sewing thread made of textile fibers (cotton thread, synthetic thread or
core spun thread) with thread thicknesses of 15/3 - 120/3.
Maximum sewing material thickness of 10 mm, when pressed together by
the lowered sewing material clamp.
The machine is only intended for processing dry material.
The sewing material must not contain any hard objects.
The sewing unit may only be set up and operated in dry conditions on well-
maintained premises. If the sewing unit is used in other spaces that are
not clean and dry then additional measures to be agreed may be
necessary (see EN 60204-31: 1999).
The sewing unit is intended for industrial use.
The manufacturer will not be held liable for damage resulting from
improper use.
3.4 Technical data
Noise emission:
Workplace-specific emission value as per DIN EN ISO 10821:
Lc = 74 dB (A) ± 0.83 dB (A) at
• Stitch length: 3.0 mm
• Sewing foot stroke: 3.0 mm
• Speed: 2,000 min
-1
• Material to be sewn: 2-layer Skai; 1.6 mm 900g/mm
2
; DIN 53352
• Sewing cycle: 18.0 seconds on and 0.0 seconds off