Operation Manual

Performance description

Operating manual 911 - Version 00.0 - 06/2013

Programming:

• Operated via the graphical control panel OP 7000

• 99 program storage locations, each with a maximum of 16000 stitches

• Programs can be sewn individually or in sequences

• Storage of up to 20 sequences, with up to 30 programs in each

sequence

• Setting of individual stitch parameters per stitch for controlling: Stroke

position of pressure foot, thread cutter, thread clamp, speed, thread

tension, etc.

• Creation of seam programs via a Teach-In procedure

(accuracy of coordinate entries: 0.1 / 1 mm)

• Integrated test program for servicing/maintenance work:

• Monitoring of the sewing process

• Configuration of machine functions

• Testing of motor functions, inputs and outputs for reference switches,

valves and transport motors, RAM memory and EPROM functions

Lubrication:

• Central oil-wick lubrication for upper section and looper

Sewing foot ventilation:

• Motorized sewing foot ventilation

Clamp opening:

• Pneumatic opening and closing of the clamps

Stitch length:

• Maximum stitch length: 12.7 mm

Thread handling:

• Electronic needle thread monitor

• Programmable needle thread tension:

Appropriate tension values for different thread extraction directions

stored in seam program. This generates a clean seam.

• Threading device:

Pulls the needle thread under the sewing material on the 1st stitch.

• Programmable stitch counter for looper thread monitoring and item

counter

• Optional: Electronic residual thread monitor

Sewing field size:

• Sewing field size between 300 x 200 mm and 600 x 550 mm

(depending on subclass)

• Special alternating clamps can be used for a width of X to 380 mm.

Ergonomics

• Height-adjustable frame via screwable feet for working heights of 760 -

910 mm, for standing work

• Foot pedal freely movable within the available cable length