Operation Manual

Safety instructions
10
Operating manual 911 - Version 00.0 - 06/2013
Safety equipment may not be removed or put out of service. If this cannot
be avoided for a repair operation, the safety equipment must be refitted
and put back into service immediately afterwards.
Work on electrical equipment may only be carried out by qualified
electrical specialists.
The connecting cable must have a power plug approved in the specific
country. The power plug may only be connected to the power cable by a
qualified electrician.
Work on live components and equipment is prohibited. Exceptions are
defined in the specifications in DIN VDE 0105.
Missing or faulty spare parts could impair safety and damage the machine.
Therefore only use original spare parts from the manufacturer.
2.2 Signal words and symbols used in safety instructions
The safety instruction text is surrounded by colored bars.
Signal words specify the severity of a danger:
In the case of dangers to personnel, the following symbols indicate the
type of hazard:
Examples of the layout of the safety instructions in the text:
Signal word Degree of severity
DANGER Resulting in death or serious injury.
WARNING Death or serious injury possible.
CAUTION Moderate to minor injuries possible.
ATTENTION Damage possible.
Signal word Type of hazard
General danger
Danger due to electric shock
Danger due to sharp objects
Danger due to crushing