Operation Manual

Setting up
Operating manual 911 - Version 00.0 - 06/2013
101
10.8 Pneumatic connection
The sewing unit must be provided with dry, oil-free air for operating the
pneumatic components.
Correct setting
A minimum operating pressure of at least 6 bar must be maintained, even
under maximum air consumption.
In the case of excessive pressure drop:
• Increase the compressor power.
• Increase the diameter of the compressed air supply line.
Machine damage possible due to incorrect operating pressure.
An incorrect pressure can cause damage to the machine.
The operating pressure for the pneumatic unit is 6 bar. A minimum
operating pressure of at least 6 bar must be maintained, even under
maximum air consumption.
Make sure that the operating pressure is set correctly before putting
the machine into operation.
ATTENTION
Machine damage possible due to oily compressed air.
Oiled compressed air must not be suppled from the compressed air
system.
After the filter, the cleaned air is used as blown air for cleaning machine
parts and for blowing out the sewn products. Oil particles in the blown
air can cause malfunctions and soil the sewn products.
Ensure that no oil particles enter the compressed air supply.
ATTENTION